Use Of Brush Plate Of Custom High Pressure Cleaning Machine


As a common cleaning equipment, Custom High Pressure Cleaning Machine is playing an increasing role in industrial and commercial cleaning operations.

 

As a common cleaning equipment, Custom High Pressure Cleaning Machine is playing an increasing role in industrial and commercial cleaning operations. At the same time, more and more people like to use scrubbers to help us finish cleaning. Why doesn't the scrubber brush rotate? How to troubleshoot? The following will be shared by Willic editor:

1. Battery problem

This must first be considered. If the scrubber has been used for more than a year, then this problem must exist, that is, the battery storage capacity becomes smaller, and the power of the scrubber is insufficient when the scrubber is started. Please charge the scrubber first. For more than hours, the scrubber can be processed without rotating the scrubber. If it is fully charged and the scrubbing operation is performed, then it is a battery problem. If it is fully charged, there is still a situation where the scrubbing does not rotate, please go to Look down.

2. Safe wire fuse

When the scrubber is fully charged, the scrubber of the scrubber still does not work, then please check the safety wire of the scrubber, stand behind the machine, and there is a box of safe wire on the left hand side, open it to view all the safe wires . If there is a problem, the safety wire is blown, and the safety wire of the brush plate can be replaced in time to fix the problem of the brush plate not rotating.

Why doesn't the scrubber brush rotate? How to troubleshoot?
Three, the line problem

There is another possibility that the scrubber brush does not rotate. It is a wiring problem. From the switch of the scrubber brush to the wiring of the motor below, you must check. Because of the aging problem of the line, the brush plate of the scrubber will not rotate. Just check this line responsible for the brushing, and the others can be left alone, so that you can find out if it is a line problem.

Four, brush plate motor

If we have checked all the above items, no problems have been found. If the brush disk of the machine still does not rotate, then it is a problem with the brush disk motor of the scrubber.

1. Perhaps the scrubber brush motor is aging, the solution is to replace the scrubber brush motor with a new one.

2. Perhaps the carbon brushes of the brush plate motor of the scrubber are worn out, and you can just replace the carbon brushes directly, or you can take out the original carbon brushes, adjust the position, and continue to use them.

3. Maybe the brush motor of custom pressure washers is damaged by water, it depends on the serious condition.